Part 10
left picture then apply the fixing screw. Please pay particular attention to the
environment requirements for UPS battery in next chapter “USING THE
TOUCH POS”.
WALL MOUNTING
Select a flat surface on wall of adequate strength and with proper
ventilation and space condition. Please
use the right material to hold this
terminal according to the wall material
(Drywall, concrete, solid wood, etc).
Consult with your contractor if it is
necessary
.
A fully equipped system
may weigh up to 13 kg or 26 lbs. Take the separated bottom plate and remove
the 4 rubber feet to work as the wall mount bracket. Fix this bracket to wall at
the 3 arrowed holes for slim base model as in the above left picture and fix to
wall at the 3 arrowed holes for universal base model as in the above right
picture with proper materials and proper preparations.
Release the base box from the base stand by
removing the 3 screws as arrowed
in the left picture for slim base
model or by removing the 3 screws
arrowed in the right picture for
universal base model. Release the
cable tie and reroute all cables
through the cable passage to main unit for wall mount
application and through the cable exit to external
connections.
Hook the base box onto the bottom plate now
fixed on the wall as wall mount
bracket and fix 1 screw on top side
as arrowed in left picture for slim
base model or as arrowed in right picture for universal base model.
Align the four matching
pegs on the back of the main unit
as circled in the left picture with
the four matching holes in the
bracket as marked in squares in
the right picture for slim base
model and in next page picture for universal base
model and allow the main unit to slide down the winding grooves in the wall
mount backpack - originally the base box. The stand assembly is not engaged
in wall mount operation. Connect all cables coming out of the backpack into
