POSIFLEX KS-6115, Руководство пользователя

Страница: 15 / 20

Part 15
DISPLAY ISSUES
Main LCD Display
For best viewing result please set your display resolution at 1024 x
768 with high color.
In configuration of system memory, max. 254 MB can be shared as
the video memory.
VGA Port
The VGA port in the KS system supports TM4115 touch monitor,
LM6212 LCD monitor or TM7112 touch monitor if there is no base mount 2
nd
LCD display. This port supports either mirror mode (identical image) or
extended mode dual display function for WinXP. To support the DC power to
these Posiflex monitor, use the DC adaptor to connect into the monitor (for
TM-4115 / TM-7112) or its VGA cable (for LM-6212) or use Posiflex VGA +
power cable and set an internal jumper in KS main unit to supply the required
power through the VGA connector (for LM-6212).
Do not connect other
monitor to this port before the power in this port is disabled.
CUSTOMER DISPLAY
Please follow the instructions on the manual that comes along with
the customer display PD-2501 or PD-2602 when it is installed.
SERIAL PORTS – COM1/2
In KS system, there are 2 serial ports available. Both serial ports can
supply a +5 V DC through pin 9 after proper jumper setting change. Both ports
are standard RS232 serial ports as status at delivery.
For models using RS232 interface touch control such as the Infra Red
type touch, COM2 is occupied and covered. Please never try to open the
cover . Otherwise the product warranty is voided.
SOUND PORTS
The audio port in KS system is arranged to have an
internal audio speaker with maximum audio power of 2 W at
lower left corner of the main unit but no direct access port in
the main unit. The external access to audio ports can be found
in the side mount option kit SD-400 with a Microphone in
and a stereo line out jacks at its bottom surface as circled in
the right picture. The internal speaker will be automatically disconnected when
a plug is inserted in the line output jack.