POSIFLEX KS-6115, Руководство пользователя

Страница: 11 / 20

Part 11
DESKTOP MOUNTING
KS6115:258~355
Match the matching pegs on the back of the main unit against the
matching holes on the stand assembly. First aim the matching pegs toward the
upper round part of the hole and make sure that all pegs are inside the holes.
Then slide the main unit down to move the pegs into the lower slot part of the
holes till it clicks. Note that all the cables come out of the stand from the lower
edge and won’t get trapped by this mounting operation. If later on you want to
remove the main unit from the stand, you’ll have to press down the
lock/release button on back of the stand at the time lifting the main unit.
For desk top/counter application, the body of KS-6115 occupies a
space of 381 mm wide, 265 mm deep and 258 to 355 mm high per main unit
tilt angle. The minimum height of above models shall be increased by about
4.5 mm if InfraRed type touch panel is used.
KS-6115U:294.5~391.5
CONNECTING CABLES
To re-assemble the main unit with stand assembly for operation,
please connect all required cables to the appropriate connectors. Please make
sure that each connector is connected to the correct port with the correct
orientation.
Damages due to incorrect connection or orientation are not
covered by product warranty!
Some connectors like the LAN connector have to be gently inserted
until a click is heard. It is recommended that connectors such as the external
VGA, COM and LPT connector be screwed into place once seated.
Adjust the slack of each cable and close the cable cover. Re-adjust the
tilt angle of the screen for best viewing.
Connect the cables to appropriate external devices through the cable
exit at the bottom of stand assembly. Please make sure that each connector has
to be connected to the right device in the right way.
CAUTION: On doing any insertion or extraction of any connector, please
always hold the connector head itself instead of pulling on the
cable wire. Failure to do this could damage the cable and jack
that is considered as an artificial destruction and is not
covered by the warranty.
Matching Holes
Matching Pegs
Round Part
Slot Part