Part 3
INSTALLATION GUIDE
UNPACKING CONTENTS
Items packed in for
Qt’y
The side mount programmable keypad itself
1
Fixation screws with washers to hold KP to HT or TM/LM
2
Transparent key caps for single key
20
Key clip
1
Control keys (4 pcs / set)
1
Legend sheets (4 sh. / set)
1
This manual
1
Note:
Utility drivers for KP-200 / KP-210 series can be found in the CD ROM
packed together with the Posiflex HT series POS terminal system or
monitor TM-7112 or LM-7112 that this upgrade kit is to be installed to.
Or please find for latest updates by visiting driver download page of our
web site:
http://www.posiflex.com.tw/DriversDownload.asp
MECHANICAL FIXATION
Either the KP-200/KP-200U to be installed in the HT series host
system or the KP-210/KP-210U to be installed to the stand-alone touch/LCD
monitor TM/LM-7112, the upgrade kit is installed
to the right edge of the LCD panel. Use the 2
fixation screws that come along with KP-200/KP-
200U or KP-210/KP-210U to hold the keypad unit
to the LCD panel from its back as circled in the left
picture. Connect the PS/2 cable of KP-200 to the PS/2 KB port in connection
area inside the back cover of HT system. Connect the much longer PS/2 cable
of KP-210 to the PS/2 KB port of the host system that the TM/LM-7112 is
connected to.
For the KP-200/KP-210 with smart card reader option in the keypad
or KP-200U/KP-210U, there will be an USB cable
coming from bottom of the keypad. Please hold it to
the holder on back of the LCD
panel as arrowed in the above
picture and connect it to the
extended USB port of HT system or
to a downlink USB port in TM/LM-
7112 monitor. Find the downlink
USB port of TM/LM-7112 at right
side of its base unit as in the left picture. Find the top
Cable Exit
Cable Cover
Downlink
USB Ports
Extended USB Port
