Part 10
slot till it reaches the top end as long as the card is a standard one. A non-
standard card recorded without complete degaussing prior to recovery may
accept only one direction in card reading.
The magnetic stripe reader in KP-200 / KP-210 connects to the host
through PS/2 KB port and therefore requires no driver installation to get it
working and when the control key is turned to “L0” position, the output of any
MSR reading is blocked for security concern. The magnetic stripe reader in
KP-200U/ KP-210U connects to the host through USB port working as a USB
KB and therefore its MSR output is independent from the control key position.
Use of the MSR in KP-200U/KP-210U also requires no driver installation
except
setting up the USB keyboard to be enabled in system BIOS CMOS
setup
. This setup is particularly important for application of the USB KB
device to operate under DOS environment. Please note that the KP-200U/KP-
210U delivered particularly for DOS environment application is different from
that for Windows environment by internal jumper setting or circuitry and
therefore they are not freely interchangeable for end users.
SMART CARD READER
Card Insertion
For smart card reading, please insert the end of the smart chip first
and have the chip facing the mark aside the side slot of KP-200/ KP-200U/
KP-210/ KP-210U as in the example picture in front side view.
Applicable Smart Card Type
The smart card reader can be used for both asynchronous and
synchronous type smart cards. For asynchronous type smart card, it reads the
card with T = 0 and T = 1 protocols up to 340 Kbps of EMV and ISO modes.
For synchronous type smart card, coverage includes: 2-wire (SLE4432/42), 3-
wire (SLE4418/28) etc.
, SDA/I2C, 4403, 4433, 4404, 896
警告使用者
這是甲類的資訊產品，在居住的環
境 中 使 用 時 ， 可 能 會 造 成 射 頻 干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。
T31454
