TP-5815 Pro series Technical Manual 7 - 3
BASE MOUNT UPGRADE KIT
This upgrade is applicable to Jiva system with either slim base or universal base.
On rear edge of the stand assembly, there is a rear connect cover. This area is designed
for installing a low profile LCD customer display option PD-305 or a 12” 2nd LCD
display panel option LM-6101 or a 15” 2
nd
LCD display monitor LM-6301 or a VFD
customer pole display option PD-2501 or PD-2602 after this cover removed.
To remove the rear connect cover in slim base please refer to the inside view of
the base unit at right and use a flat head screwdriver to pick the
plastic hook plate of the rear connect cover from inside behind the
UPS battery.
The rear connect cover of universal base can be removed
by pushing the plastic hook plate of it from inside as marked by
white arrow in the right picture. However, this picture is an up-
side-down inside view of the stand assembly with base box
removed for illustration purpose only. Please push the plastic
hook plate with finger through the top opening in the stand assembly to remove the
rear connect cover.
The family of rear mount upgrade kits may keep growing with time, the
installation principle will remain as to install the kit base or the connecting bracket to
this opening and have the interface cable passing the cable exit of the system base into
the system I/O area.
Rear connect cover
Open the rear connect cover
for rear mount upgrade kit
