TP-5815 Pro series Technical Manual 7 - 17
With all cable
connections disconnected,
release the base box from the
base stand by removing the 3
screws as red arrowed in the left
picture for slim base model or in
the right picture for universal
base model.
Though the removal of the base installed devices
from the base box is not necessary for an experienced
technician to remove the base box, a picture of an
universal base without any base installed devices is given
in the left for better view of the base box screw locations.
Turn the base box 90 degrees to the right. Release the cable tie, save the screw
for later use and reroute all
cables to main unit to go
through the lower opening as in
these 2 pictures. Now the base
box turns into the wall mount
bracket with all devices in.
There is one remark on the universal base model
though. Should there be a CDROM/COMBO drive installed,
it is most advised to change the fixing screw on CDROM
bracket from the red marked position to the blue marked
position as in the right picture to keep the outer surface of
the drive aligned with the converted wall mount bracket.
