Replacing POS Receipt Printer Module
HS-6510W/6512W/6514W offers a quick solution to help you to replace POS
receipt printer module when there is a need. Please go through the steps
described below to achieve the purpose. Before proceeding the procedure,
please ensure that the terminal is completely shut down.
1.
After laying POS terminal on a flat surface
with its bottom facing towards you, remove
the screw shown by the arrow.
2.
Position the terminal with its screen facing
toward you, and then push down the paper roll
cover release lever to open the paper roll cover,
3.
Inside the paper roll compartment, remove the
two screws indicated by the arrows.
4.
While support the terminal with one hand, grab
the right-hand side of the terminal and then
pull the front cover towards you with force to
separate the printer module from the rear case
of HS-series
5.
From the left-hand side of the terminal, remove
the front cove from the rear case.
9
