7.
To completely mount the desktop POS onto the table, please follow the
steps below.
7.1
Use the two mouting holes located on the rear of the POS to drill
another two holes on the same surface. Each hole also has to be at
least
4
1
” or 6.25 mm diameter and
8
3
1
” or 35mm in depth.
7.2
Push the POS in the direction shown by the arrow to reomve it from
the mouting bracket.
7.3
After pushing two plastic anchors into
the drilled holes, tap the plastic anchors
into the drilled holes with a hammer.
7.4
Refer Step 6 to mount the POS to the bracket.
7.5
Apply two self-tapping screws through the mounting holes into the
two plastic anchors. Then, fasten the screws to completely lock the
POS onto the table.
14
