POSEIDON Besea D100, Руководство пользователя

Страница: 22 / 44

:: 22 BESEA
USER MANUAL :: ENGLISH USER MANUAL :: ENGLISH
:: 23 BESEA
Soak the tank bands before undertaking the steps below.
Place the cylinder on the back of the harness. Its position will
affect your diving attitude which you may want to optimise after
some experience.
Tighten the tank bands by pulling the loose end.
Enter the loose end through the open slot in the buckle, and then
close the buckle
Secure the loose end with the Velcro
®
Harness Sport: Tighten the tilt protection band by pulling the
loose end.
Harness Advanced: repeat the procedure described above with
the other band.
Note. First time lacing the buckle, please refer to lacing diagram
on the left.
Securing the cylinders with dry tank bands can result in losing
the cylinders during the dive, due to the elongation of the band
material when wetted.
Using Tank Bands
WARNING
Please refer to the instructions supplied with the pinbolt kit.
Pinbolt kit can be mounted either through the standard steel
bands holding the cylinders together, or using the butterfly wash-
ers at any location between the cylinders. The advantage with
the butterfly washers is that it becomes easy to detach the cyl-
inders using the wing nut when e.g. packing your gear or filling
gas.
The use of home made pin-bolt attachment systems may damage
your harness. Such damages will not be covered by Poseidon’s
warranty terms.
Using Pinbolt-kit
WARNING