PosDelta D45, Руководство программиста

Страница: 28 / 31

• Cutting/tearing paper position offset calculation:
For black mark position is the same as the cutting/tearing paper position, that is L=0, then
Cutting/tearing paper position offset = (43-0) / 0.176 = 244 dots
• Set the cutting/tearing paper position offset by the following command:
GS （ F <4><0><2><0><244><0>
• Print starting position offset calculation:
(25-18)/0.176+244=284 dots
• Set the print starting position offset by the following command:
GS
（
F <4><0><1><0><28><1>
• After finished these steps, and when every receipt is printed:
Feed paper to the print starting position by using command
GS FF
;
Data is sent to the printer and printed out line by line;
Feed paper to the cutting/tearing position by using command
GS V m
, where the receipt
can be cut or tear.
【
Example 2
】
Paper: The distance between cutting/tearing position and black mark
position is 12mm, and that between print starting position and
cutting/tearing position is 18mm.
• Cutting/tearing paper position offset calculation:
For the length within black mark position and the cutting/tearing paper position is less