PosDelta D45, Руководство программиста

Страница: 17 / 31

[Description] Aligns all data in one line to the specified position
n selects the justification as follows:
n Justification
0,48 Left justification
1, 49 Center
2, 50 Right justification
[Details] • The command is enabled only when processed at the beginning of a line.
• This command justifies the space area of the data skipped by command
HT
.
[Default] n = 0
[Example]
26
．
ESC c 5 n
[Name] Enable/disable panel buttons
[Format] ASCII ESC c 5 n
Hex 1B 63 35 n
Decimal 27 99 53 n
[Range] 0 ≤ n ≤ 255
[Description] Enable or disable the panel buttons.
• When the LSB of n is 0, the panel buttons are enabled.
• When the LSB of n is 1, the panel buttons are disabled.
[Details] • Only the least significant bit of n is enabled.
• When the panel buttons are disabled, none of them are usable, including FEED button.
Use
GS z 0
to set paper loading latency time, in which FEED button is enabled to feed
paper.
[Default] n = 0
27
．
ESC d n
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0 ≤ n ≤ 255
[Description] Prints the data in the print buffer and feeds n lines.
[Details]
• This command sets the print starting position to the beginning of the line.
• This command does not affect the line spacing set by
ESC 2
or
ESC 3
.
• The maximum paper feed amount is 1016 mm (40 inches). If the paper feed amount ( n x line
spacing) of more than 1016 mm (40 inches) specified, the printer feeds the paper only 1016
mm (40 inches).