PosDelta D45, Руководство программиста

Страница: 14 / 31

• Transmit [n] k in ascending order and place a NUL code 0 at the end. When [n] k is less
than or equal to the preceding value [n] k- 1, tab setting is finished and the following data is
processed as normal data.
•
ESC D NUL
cancels all horizontal tab positions.
• The previously specified horizontal tab positions do not change, even if the character
width changes.
[Default] The default tab positions are at intervals of 8 characters (columns 9, 17, 25…) for font B (7
x 9).
[Reference] HT
18
．
ESC E n
[Name] Turn emphasized mode on/off
[Format] ASCII ESC E n
Hex 1B 45 n
Decimal 27 69 n
[Range] 0 ≤ n ≤ 255
[Description] Turns emphasized mode on or off.
• When the LSB of n is 0, emphasized mode is turned off.
• When the LSB of n is 1, emphasized mode is turned on.
[Details] • Only the least significant bit of n is enabled.
• Bit image is not to be emphasized.
• This command and
ESC !
turn on and off emphasized mode in the same way.
• Printer output is the same in double-strike mode (
ESC G
) and in emphasized mode.
• Alphanumeric characters and Kanji characters are affected by this command.
[Note] • Bi-direction print is with a lower speed in the emphasized mode.
[Default] n = 0
[Reference] ESC !
，
ESC G
19
．
ESC G n
[Name] Turn on/off double-strike mode
[Format] ASCII ESC G n
Hex 1B 47 n
Decimal 27 71 n
[Range] 0 ≤ n ≤ 255
[Description] Turns double-strike mode on or off.
• When the LSB of n is 0, double-strike mode is turned off.
• When the LSB of n is 1, double-strike mode is turned on.
[Details] • Only the least significant bit of n is enabled.
• Bit image is not to be double-strike.
• Printer output is the same in double-strike mode and in emphasized mode (
ESC E
).
• Alphanumeric characters and Kanji characters are affected by this command.
[Note] • Bi-direction print is with a lower speed in the double-strike mode.
[Default] n = 0
[Reference] ESC E