POSBank AnyShop D5, Руководство пользователя

Страница: 62 / 91

62
•
Clear NVRAM
Set this value to force the BIOS to clear the Non-Volatile Random Access
Memory (NVRAM). The Optimal and Fail-Safe default setting is No.
•
Plug& Play O/S
When set to No, BIOS configures all the devices in the system. When set to Yes and if you install a Plug
and Play operating system, the operating system configures the Plug and Play devices not required for
bootup.
•
PCI Latency Timer
Value in units of PCI clocks for PCI device latency timer register.
•
Allocate IRQ to PC IVGA
When set to Yes, will assign IRQ to PCI VGA card if card requests IRQ.
When set to No will not assign IRQ to PC IVGA card even if card requests an IRQ.
•
Palette Snooping
This item is designed to solve problems caused by some non-standard VGA card.
•
PCI IDE Bus Master
When set to enabled, BIOS uses PCI bus mastering for reading! Writing to IDE drives.
•
Off Board PCI / ISA IDE Card
Some PCI IDE cards may require this to be set to the PCI slot number that is holding the card.
Set to Auto works for most PC/IDE cards.
•
IRQ 3/ 4/ 5/ 7/ 9/ 10/11
This item allows your respectively as sign an interrupt types for IRQ-3, 4, 5, 7, 9, 10,11.
•
DMA Channel 0/1/3/5/6/7
When set to Available, will specify DMA is available to be used by PCI/PnP devices.
When set to Reserved, will specified DMA is Reserved for use by legacy ISA devices.
•
Reserved Memory Size
This item allows you to reserve a set amount of memory for legacy ISA devices.