POSBank AnyShop D5, Руководство пользователя

Страница: 49 / 91

49
(2) BIOS setup program
This motherboard supports a programmable firmware chip that you can update using the provided utility
described in section “2.1 Managing and updating your BIOS.”
Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to
“Run Setup”. This section explains how to configure your system using this utility.
Even if you are not prompted to use the Setup program, you can change the configuration of your computer in
the future. For example, you can enable the security password feature or change the power management settings.
This requires you to reconfigure your system using the BIOS Setup program so that the computer can recognize
these changes and record them in the CMOS RAM of the firmware hub.
The firmware hub on the motherboard stores the Setup utility. When you start up the computer, the system
provides you with the opportunity to run this program.
Press <Del> during the Power-On-Self-Test (POST) to enter the Setup utility; otherwise, POST continues with its
test routines.
If you wish to enter Setup after POST, restart the system by pressing <Ctrl+Alt+Delete>, or by pressing the reset
button on the system chassis. You can also restart by turning the system off and then back on. Do this last option
only if the first two failed.
The Setup program is designed to make it as easy to use as possible. Being a menu-driven program, it lets you
scroll through the various sub-menus and make your selections from the available options using the navigation
keys.
•
The default BIOS settings for this motherboard apply for most conditions to ensure
optimum performance. If the system becomes unstable after changing any BIOS settings,
load the default settings to ensure system compatibility and stability. Select the Load
Default Settings item under the Exit Menu. See section “2.7 Exit Menu.”
•
The BIOS setup screens shown in this section are for reference purposes only, and may
not exactly match what you see on your screen.
2.1 Legend Box
The keys in the legend bar allow you to navigate through the various setup menus.
Key(s) Function Description
F1 General help, only for Status Page Setup Menu and Option Page Setup Menu
Esc Return to the main menu from a sub-menu or prompts you to quit the setup program
←,→
Move to the item in the left or right hand
↑,↓
Move to previous or next item
Enter Brings up a selection menu for the highlighted field
+ or PgUp Moves the cursor to the first field
- or PgDn Moves the cursor to the last field
F5 Loads the previous values
F6, F7 Loads the fail-safe / optimized defaults
F10 Saves changes and exits Setup