BIOS Setup Information
WADE-8044 User’s Manual
4-19
ECP Mode Use DMA
This is used to select a DMA channel of the parallel port.
PWRON After PWR-Fail
This item allows user to configure the power status of using ATX power supply after
a serious power loss occurs.
On
System automatically restores Power back
Off
System stays at Power-Off
Former-Sts
System power on depends on the states
before AC lost
OnBoard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Enable this function.
Disabled
Disable this function. (Default value)
Watch Dog Timer Select
The choice: Disabled, 10/20/30/40 sec, 1/2/4 Min.
Onboard Serial Port 3/4/5/6
Allows you to manually select an I/O address for the onboard serial port 3/4/5/6
The choice: 280/288/2A0/2A8
※
Onboard Serial Port 5 and 6 are optional
Serial Port 3/4/5/6 Use IRQ
Allows you to manually select an IRQ for the onboard serial port 3/4/5/6
The choice: IRQ 3 / IRQ 4 / IRQ 10 / IRQ 11
※
Onboard Serial Port 5 and 6 are optional
