System Installation
WADE-8044 User’s Manual
3-1
Chapter 3
System Installation
This chapter provides you with instructions to set up your system. The additional
information is enclosed to help you set up onboard PCI device and handle Watch Dog
Timer (WDT) and operation of GPIO in software programming.
3.1 Intel
®
Pentium M/Celeron M Processor
Installing Socket 479 CPU on actuator (for PGA Processor Type)
Making sure to loosen the latch of actuator at correctly position (Open), and then
configure CPU more gently, don’t be forcible push to do it.
Figure 3-1
Removing CPU
1) Unlock the cooling fan first.
2) Unlock the latch of CPU socket to open position.
3) Carefully lifts up the existing CPU to remove it from the actuator.
4) Follow the steps of installing a CPU to change to another one or drive latch to close
the opened actuator.
Configuring System Bus
WADE-8044 of PGA Type will automatically detect the CPU used. CPU speed of Intel
Pentium M /Celeron M can be detected automatically.
