PNC-2413 User’s Manual
10
2.9 Remove and Install PCI card
One PCI slot is available to PNA-2413. Follow the steps below for installation:
1. The PCI slot is located on the back of the board (
Fig. 2-32
).
2. The back of the PCI card should be against the back of PPAP-200 (
Fig. 2-33, 2-34
).
Fig. 2-32
PCI slot on the back of PPAP-200
Fig. 2-33
Push the PCI add-on card into the slot
3. Fix the board back in position with four screws (
Fig. 2-35
).
Fig. 2-34
The PCI card
Fig. 2-35
Reinstall after adding a PCI card
4. The metal tip of the PCI card’s bracket should be placed outside of the chassis corner (
Fig. 2-36
).
5. Plug the EZIO-COM port cable to both ends (
Fig. 2-37
).
Fig. 2-36
The PCI card’s bracket tip is placed
outside of the chassis corner
Fig. 2-37
Plug the EZIO COM port connector
to COM port
