Portwell PNA-2413, Руководство пользователя

Страница: 10 / 24

PNC-2413 User’s Manual
8
2.8 Remove and Install HDD
The system has an internal drive bay for one 3.5" hard disk drive. If the HDD is not pre-installed,
you can install it by yourself. Follow the steps below to install the HDD:
Before a HDD can be installed onto PNA-2413. PPAP-200 must be taken off from the chassis.
1. Remove EZIO COM port cable (
Fig. 2-22
) and the power connector from EZIO (
Fig. 2-23
).
Fig. 2-22 Remove the COM port cable Fig. 2-23 Remove power connector from EZIO
2. Take off the screws to unlock PPAP-200 ( Fig. 2-24 ).
3. Remove the HDD bracket. Users should remove screws of the indicated position ( Fig. 2-25 ).
Fig. 2-24 Unscrew to loose PPAP-200 Fig. 2-25 Remove HDD bracket
4. Fasten the both screws to lock HDD and bracket together ( Fig. 2-26a, 2-26b ).
Fig. 2-26a A 3.5” HDD and the HDD bracket Fig. 2-26b Fix HDD to the bracket