PNC-2413 User’s Manual
9
5. Connect the IDE cable and power connector to HDD (
Fig. 2-27
).
6. Fasten both screws back to lock HDD onto chassis (
Fig. 2-28
).
Fig. 2-27
Connect power and IDE cable to
HDD
Fig. 2-28
Install into chassis
7. Fold the IDE cable under the hard disk in 45
angle. So it will be easier to connect to IDE
interface connector (
Fig. 2-29
).
8. Put the PPAP-200 back to the chassis (
Fig. 2-30
).
Fig. 2-29
Fold the IDE cable
Fig. 2-30
Drive all four screws back
9. Connect the EZIO COM port cable and the IDE cable (
Fig. 2-31
).
Fig. 2-31
Recover cable connection
