Portwell PEB-2772VGATM, Руководство пользователя

Страница: 51 / 53

Troubleshooting
PEB-2772AVGATM User’s Manual 5-2
Please also make sure every other necessary devices are connected before hooking
up power source.
Loading the default optimal setting
When prompted with the main setup menu, please scroll down to “ Load Setup
Defaults ”, press “Enter” and “Y” to load in default optimal BIOS setup. This will
force your BIOS setting back to the initial factory configuration. It is recommended to
do this so you can be sure the system is running with the BIOS setting that Portwell
has highly endorsed. As a matter of fact, users can load the default BIOS setting any
time when system appears to be unstable in boot up sequence.
5.2 FAQ
Question: I forget my password of system BIOS, what am I supposed to do?
Answer: You can simply short 2-3 pins on J22 to clean your password.
Question : I cannot boot up my system!
Answer: Please make sure all the setups were followed the instruction in User’s
manual. Unplugged any other add-on device to isolate the possibility of external
affection and try again. If the SBC still does not boot, please contact with our
Technical support department.
Note:
Please visit our technical web site at http://www.portwell.com.tw
For additional technical information, which is not covered in this manual, you can
mail to
tsd@portwell.com.tw or you can also send mail to our sales, they wull be very
delighted to forward them to us.