Portwell PEB-2772VGATM, Руководство пользователя

Страница: 28 / 53

BIOS Setup Information
PEB-2772AVGATM User’s Manual 4-1
Chapter 4
BIOS Setup Information
PEB-2772 equipped with the Phoenix BIOS stored in SPI Flash. BIOS has built-in
setup program that allows users to adjust the basic system configuration. This type of
information is stored in CMOS RAM that it is retained even if power-off periods.
When system turns on, PEB-2772 communicates with peripheral devices and checks
its hardware resources referring to the configuration information stored in CMOS
memory. If any error occurs, or CMOS parameters need to be defined, the diagnostic
program will prompt to user to enter the SETUP program. Some errors are significant
that’ll abort the start-up process too.
4.1 Entering Setup
Turn on or reboot the computer. When the message “Hit <F2> if you want to run
SETUP” appears, press <F2> key immediately to enter BIOS setup program.
If the message disappears before you respond, but you still wish to enter Setup,
please restart the system to try “COLD START” again by turning it OFF and then
ON, or touch the "RESET" button. You may also restart from “WARM START” by
pressing <Ctrl>, <Alt>, and <Delete> keys simultaneously. If you do not press the
keys at the right time and the system will not boot, an error message will be displayed
and you will again be asked to,
Press <F2> to Run SETUP or Resume
In HIFLEX BIOS setup, you can use the keyboard to choose among options or modify
the system parameters to match the options with your system. The table below will
show you all of keystroke functions in BIOS setup.