Portwell PEB-2772VGATM, Руководство пользователя

Страница: 25 / 53

System Installation
PEB-2772AVGATM User’s Manual 3-6
outp(EFER,WDT_PIN_SEL_REG); //Select Multi-function Pin Selection Register is
0x2d
outp(EFER + 1,inp(EFER + 1) & ~tmp); //Set bit0 to 0 to enable WDT function,
0:WDTO# 1:GPIO50
outp(EFER, DEVICE_NUM_REG); //Select Logic Device Number Register is 0x07
outp(EFER + 1, WDT_LOGIC_NUM); //device number for WDTO# is
0x08
outp(EFER, WDT_CNT_REG); //Select Control Mode Register is
0xf5
outp(EFER + 1, inp(EFER + 1) | (mode * tmp1)); //bit3 0:second,1 Minute
outp(EFER, WDT_COUNT_REG); //Select WDTO# Counter Register is
0xf6
outp(EFER + 1, time);
outp(EFER, WDT_CS_REG); //Select WDTO# Control & Status Register is
0xf7
outp(EFER + 1, inp(EFER + 1) | tmp2); //Enable reset timer by keyboard interrupt