Frequent Asked Questions
FUDA2-S1x11 Series Panel PC User’s Manual
6-4
Q4: What supposed to do when forget the password of system BIOS?
Answer:
Please turn off the power supply, and then find the JP1 to set it from 1-2 short to 2-3
short. Wait for 5 seconds to clean password; then set it back to 1-2 short to turn on
power supply.
JP1: CMOS Setup
PIN NO.
DESCRIPTION
1-2
Normal (Keep CMOS Setup)
★
Default
2-3
Clear CMOS Setup
Q5: How to set AT mode for the system?
Answer:
The default setting is ATX mode: user needs to press the power button in order to
turn on the system. By adjusting SW2 port 1 jumper on board and restart the system,
user can set the system as AT mode.
SW2: AT/ATX & BIOS recovery Setup
PIN NO.
DESCRIPTION
1-4(Port1)
ON: AT Mode
OFF:ATX Mode
★
Default
*Note: Diagram ATX mode setting
*Note: Diagram AT mode setting
