System Installation
FUDA2-S1x11 Series Panel PC User’s Manual
2-11
TFT-LCD Display with touch:
The Panel PC is built in a TFT-LCD display and designed with a 5-wire resistive
touch screen. The touch screen allows contacts of pen or finger to move the mouse
pointer but only functions normally after integrating necessary software.
*Note: Do not use a hard or a pointed object (like screw drivers or pliers) to operate
the touch screen.
*Note: P-CAP touch screen could be by project.
Aluminum Front Bezel:
Rugged Aluminum front bezel meets IP65 protection.
Black Overlay:
Customized nameplate is an option in addition to standard black overlay.
2.7.2 Rear View
DC in 12-24V via 3-pin Terminal Block Connector:
Provide power connection of Panel PC to the main power source via DC power cable
or AC/DC adapter.
Power Button:
Press the button to turn ON/OFF the Panel PC.
Reset Button:
Press the button to restart the Panel PC.
Power LED and HDD LED:
It demonstrates the power in and HDD working status of the Panel PC.
Status
Power LED
HDD LED
Off
N/A
N/A
Working
Green
Red
Gigabit Ethernet:
Two Gigabit Ethernet (10/100/1000 Mbits/sec) LAN ports by using dual Intel®
I210IT GbE Ethernet Controller (Support Jumbo Frame)
