EUDA2 Series 12”/15”/18.5” Panel PC User’s Manual (ver2.1) 21
System Installation
6. System Installation
For Technical Support for Portwell Panel-PC hardware, contact your local Portwell Distributors or
Portwell’s Technical Support. For more information, please refer to the “Technical Support” section in
this manual.
6.1 H/W Installation
6.1.1 Connector & Jumping Setting
You may configure the EUDA2 Panel PC Series system, EUDA2-S1220/EUDA2-S1520/EUDA2-S1821, to match
the needs of your application by setting Jumpers on main board. To select any option, cover the jumper cap
(SHORT) or remove (NC) it from the jumper pins according to the following instructions. Here NC stands for
“Not Connect”.
Figure 6-1: Top-side Jumper and Connector Locations (Component Side)
Figure 6-2: Top-side Jumper and Connector Locations (Solder Side)