background image

1. 

Drive for cardan crank

.

The operation of the crank lifting mechanism requires special caution and skills because the gear used 
allows for obtaining large forces that may damage the elements of the external blind. Therefore, stop 
turning the crank when you feel resistance or notice that the blind curtain has stopped during lifting or 
lowering. In external blinds, turning the crank clockwise causes lifting the blind curtain, while turning the 
crank counter-clockwise causes lowering the blind curtain

.

2. 

Drive for the motor

.

Press the key of the remote/ switch with the appropriate marking of the blind movement direction (up/ 
down). At this moment the blind will start lifting or lowering. To stop the motor operation, press the MY 
button  on  the  remote  (in  the  case  of  a  switch,  release  the  key  or  press  the  key  with  the  opposite 
direction). When the blind is fully open or closed, the motor will be automatically stopped by the limit 
switch. Use the scroll wheel on the remote for precise setting the position of the external blind slats

.

In case of noticing that the blind curtain has stopped and the motor is still running, stop the motor 
immediately by pressing the MY button on the remote (in the case of a switch with non-support mode 
release the key or in the case of a switch with support mode press the key with the opposite direction). 
The motor has a thermal switch that stops the operation after reaching a certain temperature. The time 
of continuous motor operation is about 4 minutes. Then, the motor can be turned off until it cools down, 
i.e. for about 4 to 5 minutes, while the total time needed for cooling the drive is 30 minutes.

INSTRUCTIONS FOR OPERATION 

OF

 

THE EXTERNAL BLIND

7

max. 800mm

2.

Содержание ZF3000-BX











Отзывы: