10
The reports will be summarized as
(1)
Intelligent report
Parameters: On/Off, Report time when moving, Report time when stop, and threshold speed. (min. speed is 0.1
km/Hr, max. speed is 1000 km/Hr).
(2)
Intelligent history report (record the report in the system’s flash ram)
Parameters: On/Off, Report time when moving, Report time when stop, and threshold speed. (min. speed is 0.1
km/Hr, max. speed is 1000 km/Hr).
(3)
Fixed time report
Parameters: On/Off, and time.
(4)
Fixed distance report
Parameters: On/Off, and distance. (Min. distance is 0.1 km, max. distance is 100 km).
(5)
Keep alive procedure
GPRS dial-up procedure
1) GPRS always one-line with keep alive packet
Parameters: interval and retry times.
While using this mode, the unit will send out the “keep alive packet” to the server and wait for “ACK” back to
maintain the connection. If no “ACK” is received, the unit will actively retry GPRS connection within the
settings.
2) Base on report mode (no keep alive)
Parameters: Max. reconnect times, reconnect interval
While using this mode, the unit will connect to the server when there is a report to send. If the first connection
is failed, it will retry to connect to the server up to the max. reconnect times. Each retry will be separated by the
reconnect “interval”.
3) GPRS connect once
While using this mode, the unit will connect to the server when there is a report to send (but only try once). If it
is not successful, the report will be stored and sent out in the next successful connection. Disconnect GPRS
connection when report sending is completed.
Reduce GPRS dialup method
Parameters: On/Off, Max. reconnect times, connect delay
If this method is used, the unit will reduce the GPRS dial-up connection when the dial-up is failed after number
of times. User can define the delay time for the unit before try to reconnect to the server. If there is trigger
report, the unit will connect to server immediately.
