11
Simulate
Click this buttons, it will base on the configurations to generate an approximate maximum dial-up numbers
within 24 hrs. Therefore, user can predict the worst case dial-up connection if the server link is dead or GPRS
disconnected.
Special command for SMS mode:
If the GT3100 is not in the GPRS online status, user can send command &&Y02 or &&Y04 to ask unit to
connect to server. This command can be sent from any device via SMS;
&&Y02:
When received this command, system will actively try to connect to server in next 600 seconds.
&&Y04,[connection time],[report interval]:
For example: &&Y04, 3600, 60
When received this command, system will connect to server in the next 3600 seconds, and send one report out every
60 seconds.
(6)
Course change report (to send a report when the course change is bigger than the value set here)
Parameters: On/Off, and course change in degree.
(7)
Temperature report
Parameters: On/Off, and min. and max. Temperature.
(8)
Low battery warning report (to alert user when the external battery level is low)
Parameters: On/Off, and warning battery level for report. For example, 50 to represent 50% lower level report.
The system will ignore the parameter with a value ‘0’ to prevent continuous non-stop reporting.
(9) Speeding report: (min. speed is 0.1 km/Hr, max. speed is 1000 km/Hr).
Parameters: on/off, and speed
4. [Alarm REPORT setup]
Alarm report(s) is also configurable. User can customize the events generated by the in-vehicle input or build in car
alarm to be sent to the server. If the item(s) were selected (VALID), the related reports will be sent. Otherwise the
report will be ignored even when an event is occurred internally.
Sleep mode: ACC OFF without any trigger in 5 minutes, system will enter sleep mode, any trigger in anytime can
awaken system.
