Page 8
For technical questions, please call 1-888-866-5797.
Item 62630
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Operating Instructions
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
Using cord Hook
1. An extension cord (sold separately) will be required.
Ensure that the extension cord is an outdoor
type extension cord and that it is the correct
design to accept this appliance’s plug.
2.
WARNING!
TO pREVENT ELEcTRIc SHOcK AND
SERIOUS pERSONAL INJURy:
The extension cord must remain
secured to the appliance’s plug.
3. Secure the extension cord
using the cord hook
as explained below.
a. Make a loop in the
extension cord, and
press that cord loop through
the hole in the handle.
b. Hook that cord loop
around the cord hook.
c. Make sure the Trigger is released, then
plug the cord into the connector.
General Operation
1. Before operating the gardening appliance,
put on ANSI-approved safety goggles and
other safety gear.
Safety goggles and other safety gear
are sold separately.
2. Mark off the hedge you will trim using stakes and
marking string (sold separately).
Remove all decorations, lighting fixtures, and cords
from the area. Search for all branches thicker than
5/8″ diameter and cut to length using
loppers (sold separately).
WARNING! TO pREVENT SERIOUS INJURy FROM
ELEcTRIc SHOcK: Keep power cord away from
hedge and cutting area. If power cord is cut or
damaged immediately disconnect it from outlet.
3. When the area is clear, hold the Blade near
the hedge and squeeze the Safety Switch first,
then the Trigger to start the Trimmer.
WARNING! TO pREVENT SERIOUS INJURy:
Keep your hands on the Handle and
Front Handle at all times during operation.
NOTIcE:
Be careful to avoid contacting any chain-link
or wire fence, they may damage the Blade.
4. Take off layers of plant material gradually,
using multiple passes. This will help avoid
damaging the hedge, and will help prevent
accidentally cutting thick branches or other
objects hidden within the hedge.
5. If the Trimmer gets stuck on a branch:
a. Unplug the Power Cord.
b. Remove the Blade from the branch.
c. Cut the branch to the desired length
using a lopper (sold separately).
WARNING! TO pREVENT SERIOUS INJURy:
Wait for the Blade to stop completely before putting
down the Trimmer. The Blade will briefly keep
moving, even after the Trigger has been released.
6. To prevent accidents, release the Trigger to
turn off the Trimmer and unplug it after use.
Clean and lubricate the Blade using a light machine
oil, cover the Blade with the Sheath, then store
the appliance indoors out of children’s reach.
a
b
c
