Page 5
For technical questions, please call 1-888-866-5797.
Item 62630
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
General Safety
1. The blade will continue to move for a few seconds
after use. Allow it to stop completely and unplug
it before putting the appliance down, making
any adjustments, or servicing the appliance.
2. Do not use in rain, snow, sprinklers, or wet grass.
Do not rinse off the Trimmer.
3. Use only during daylight hours.
4. Carefully inspect the Blade Assembly before
plugging in the Trimmer. Do not use Trimmer if any
part of the Blade Assembly is bent, dull, or damaged.
5. Cover the Blade Assembly with
the Sheath after every use.
6. The Trigger and Safety Switch are important
safety devices. Do not disable or tie
down either Trigger or Safety Switch.
7. Do not cut toward your body or face.
8. Do not use appliance for other than intended use.
9. Maintain labels and nameplates on the appliance.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
SAVE THESE INSTRUcTIONS.
Specifications
Electrical Rating
120VAC / 60Hz / 3.5A
No Load Speed
3,500 SPM
(Strokes Per Minute)
Branch Capacity
5/8″ diameter
4008438
