Page 6
Item 61714
For technical questions, please call 1-888-866-5797.
SAFETy
OpERA
TION
MAINTENANcE
SETUp
Set Up Instructions
Read the ENTIRE IMpORTANT SAFETy INSTRUcTIONS section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION:
Turn the power Switch of the appliance to its “OFF” position and unplug the appliance
from its electrical outlet before assembling or making any adjustments.
Note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
Assembly
1. Slide the Axle (65) through the holes
on the Lower Frame (64).
2. Slide a Washer (66), a Bushing (67), a Wheel (68)
and another Washer (66) onto one end of the Axle.
Figure A
3. Secure in place with a Pin (63).
4. Repeat steps 2 and 3 on the other end of the Axle.
5. Press the Wheel Covers (62) onto the Wheels,
over the Pins, using a rubber mallet (sold
separately) to lightly tap them in place if needed.
Slots
Base
Lower Frame
Axle
Figure B
6. Turn the Chipper/Shredder upside down and slide
the Lower Frame ends into the slots on the Base.
7. Align the holes and secure in place
with two Washers and Screws.
Bushing
Washer
Wheel
Pin
Wheel Cover
