ASSEMBLY INSTRUCTIONS
5. Connect the supply leads from the electrical box to the
fixture wire leads using the wire nuts (BB). The
black lead
from the fixture (A) goes to the
black supply lead
and the
white lead
from the fixture (A) goes to the
white supply
lead
. Secure the wire nuts (BB) properly to prevent the
wires from coming loose. Tape the wire nuts (BB) to the wire
using electrical tape (not included). Carefully push the
spliced wires back into the electrical box.
7. Grasp bulb (C) by the plastic base and align the pins on
the lamp with the socket openings. Rotate it clockwise
approximately 1/4 turn until the lamp base is secure in the
socket.
8. While holding the diffuser (B) in the palms of your hands,
apply sufficient pressure onto the diffuser (B) in order to
rotate it clockwise until it screws onto the threads of the
fixture (A); this will take approximately 1/4 turn. Make sure
the diffuser (B) is fully screwed onto the fixture (A) before
releasing it.
Restore power.
BB
BB
BB
Wire Nut
x 3
BB
Hardware Used
4. Snap the metal socket clip of the preassembled bulb
socket into the rectangular hole of fixture (A) until you feel
it lock into place. Tug on the bulb socket to make sure it
is properly locked. Feed the bulb sockets wires through
the circular wire opening, into the backside of the fixture
(A).
6. Position the fixture (A) over the electrical box so the
machine screws (AA) pass through the round openings of
the keyhole slots in the back of the fixture (A). When both
machine screws (AA) are through the keyholes, twist the
fixture (A) until the bodies of the machine screws (AA) are
engaged in the narrower end of the keyhole slot. Hold the
fixture (A) in place and tighten the machine screws (AA).
Hardware Used
Machine
Screw
x 2
AA
6
5
A
AA
AA
C
4
7
8
B
Lowes.com/portfolio
