7
CARE AND MAINTENANCE
•
Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives
to clean fixture as they may damage the finish.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Bulbs will not light.
1. Bulb is burned out.
2. Power is off.
3. Faulty wire connection.
4. Faulty switch.
1. Replace light bulb.
2. Make sure power supply is on.
3. Check wiring.
4. Test or replace the switch.
Fuse blows or the
circuit breaker trips
when light is turned
on.
Crossed wires or power wire is
grounding out.
Check wire connection.
ASSEMBLY INSTRUCTIONS
G
K
J
I
8
Silicone Sealer
8. Make sure exterior wall surface and fixture
backplate are free of dirt before applying caulk.
Using silicone sealer, start on one side of fixture
backplate and follow contour, where the fixture
backplate meets the exterior wall surface upward.
Proceed to caulk over top of backplate and down
other side.
Do not caulk bottom of fixture backplate to ensure
proper moisture drainage.
Outdoor Fixture
Backplate
Exterior Wall
Surface
Lowes.com/portfolio
