PRECAUTIONS
On Safety
2
+
Make sure hook is securely fastened on the
basketball rim, by pulling downward and
snapping into place.
+
IMPORTANT – When dropping the weight
during the test procedure, keep hands, fingers
and cord clear of tube enclosure to avoid
possible injuries or damage to the unit.
On Power Sources
+
Use only an alkaline 9-volt battery.
+
When unit is not in use or is being stored for an
extended period of time, the battery should be
removed to avoid damage that can be caused by
battery leakage or corrosion.
+ LOW BATTERY
warning will begin when the
unit
detects the 9-volt battery is at
approximately 7 volts.
DEAD BATTERY
display jeopardizes instrument accuracy, and a
new battery should be installed immediately!
+
Battery life is 20-40 hours, depending on battery
quality and use.
+
When in execute mode,
Drop Weight
uses the
most electricity and will drain the battery
prematurely.
On Placement
+
Do not leave the testing device in a location
near heat sources, or in a location subject to
direct sunlight, excessive dust, or mechanical
shock.
+
It is best to store the unit in the case provided, to
protect it from dust and shock.
Removal From Case
+
When removing the unit from the carrying case,
make note of the packing material, so the unit
may be properly repacked when testing is
completed.
SETTING UP
Assembly
1.
Unscrew hook (turn
counterclockwise) (Photo
A) and pull hook and
shaft out of unit until it
stops (Photo B).
2.
Tighten (turn
counterclockwise)
extended hook securely,
according to the label on
the shaft (Photo C).
Photo A
Photo B
Photo C
Содержание FAIR-COURT
Страница 3: ......
