Porter-Cable PCXB340SS, Инструкция по эксплуатации

Страница: 12 / 28

12
GLOSSARY OF TERMS
SCROLL SAW TERMS
BEVEL SCALE –
Represents the degree of
table angle from 0° to 45° when the table is
tilted for bevel cutting.
BLADE GUARD FOOT – Guards the blade
and keeps your workpiece from rising. Helps
protect fingers from blade contact.
BLADE GUARD FOOT LOCK KNOB –
Allows you to raise or lower the foot and lock
it at the desired height.
BLADE HOLDERS – Retain and position the
blades.
BLADE STORAGE – Provides convenient
easy access to extra blades or wrenches.
BLADE TENSION KNOB – The blade tension
knob quickly sets and resets the blade tension
when performing interior cutting operations or
changing blades.
SAWDUST BLOWER –
Keeps sawdust from
covering the line of sight for more accurate
cuts. The best results occur when the
blower tube is directed toward the blade and
workpiece.
SAWDUST COLLECTION PORT – Allows
vacuum hose or attachments to be used to
remove the sawdust from under the table and
base.
TABLE LOCK KNOB – Securely locks the
table at the angle desired for bevel cutting.
VARIABLE SPEED ON/OFF CONTROL
KNOB – Variable switch dial allows greater
versatility when cutting a variety of materials.
Adjust the speed to the desired setting,
between 550 to 1600 strokes per minute
(SPM), by turning the control knob clockwise
or counter clockwise.
WOODWORKING TERMS
BLADE TOOTH SET –
The total width the
blade will cut based on the distance from the
outside point of one bent tooth to the outside
point of the next bent tooth establishing set of
teeth.
DEFLECTION –
Slight movement of blade
in the horizontal direction while the blade is
moving inline during cutting operation. This
may be caused by the blade following the
grain or the path of least resistance.
FEED – Rate of moving material to be cut into
the blade.
KERF – The slot cut by the blade.
LEADING EDGE – The front edge of the
workpiece that is guided into the blade.
SAW BLADE PATH –
Area or line of sight of
the workpiece moving in line toward the saw
blade edge.
SURFACE – Top of workpiece being cut.
TRAILING EDGE –
The end of the workpiece
edge last cut by the saw blade.
WORKPIECE – Material on which the cutting
operation is being performed.
Kerf
Leading edge
Saw blade path
Trailing edge
Workpiece
Surface