Porter-Cable PCC772B, Инструкция по эксплуатации

Страница: 4 / 20

• USE PROPER EXTENSION CORD. Make sure your extension cord is in good
condition. When using an extension cord, be sure to use one heavy enough to carry
the current your product will draw. An undersized cord will cause a drop in line voltage
resulting in loss of power and overheating. The following table shows the correct size to
use depending on cord length and nameplate ampere rating. If in doubt, use the next
heavier gauge. The smaller the gauge number, the heavier the cord.
SAVE THESE INSTRUCTIONS
COMPONENTS
1. Volume buttons
2. Power button
3. Bluetooth
®
/ Auxiliary mode button
4. 20v Max* battery port
5. Auxiliary jack
6. Auxiliary jack holder
7. AC adapter port
8. AC adapter
POWER/VOLUME ADJUSTMENT
1. To operate as a corded product (insert the AC adapter (8) into the AC
adapter port (7), then plug the adapter into an appropriate AC power outlet or generator.
2. To operate as a cordless product, insert a fully charged 20v Max* Porter Cable
battery (not included) into the battery port (4). Be sure battery is fully seated.
3. To turn the speaker on, press the power button (2). Press the power button again to
turn the speaker off.
4. Press the “+” button (1) to increase the volume. To decrease the volume, press the “-”
button.
NOTE: If the battery is attached to the speaker and the AC adapter is plugged in at the
same time, the speaker will run off of the adapter and not drain the battery. Having both
attached simultaneously will not charge the battery.
4
Minimum Gauge for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50 51-100 101-150
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
240V 0-50 51-100 101-200 201-300
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating
More Not more American Wire Gage
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended
6
5
4
1
2
3