background image

4- ENG

A02231

HAZARD

RISK OF BURSTING

AIR TANK:

THE FOLLOWING CONDITIONS COULD LEAD TO A WEAKENING OF THE

TANK, AND RESULT IN A VIOLENT TANK EXPLOSION AND COULD CAUSE
PROPERTY DAMAGE OR SERIOUS INJURY.

HOW TO PREVENT IT

WHAT CAN HAPPEN

DRAIN TANK DAILY OR AFTER EACH USE. 

IF

TANK DEVELOPS A LEAK, REPLACE IT
IMMEDIATELY WITH A NEW TANK OR REPLACE
THE ENTIRE COMPRESSOR.

NEVER

DRILL INTO, WELD, OR 

MAKE ANY

MODIFICATIONS TO THE TANK

OR ITS

ATTACHMENTS.

THE TANK IS DESIGNED TO WITHSTAND
SPECIFIC OPERATING PRESSURES. 

NEVER

MAKE ADJUSTMENTS OR PARTS
SUBSTITUTIONS TO ALTER THE FACTORY
SET OPERATING PRESSURES.

FOR ESSENTIAL CONTROL OF AIR
PRESSURE,

YOU MUST INSTALL A PRESSURE

REGULATOR AND PRESSURE GAUGE TO THE
AIR OUTLET (IF NOT EQUIPPED) 

OF YOUR

COMPRESSOR. FOLLOW THE EQUIPMENT
MANUFACTURERS RECOMMENDATION AND
NEVER EXCEED THE MAXIMUM ALLOWABLE
PRESSURE RATING OF ATTACHMENTS. 

NEVER

USE COMPRESSOR TO INFLATE SMALL LOW-
PRESSURE OBJECTS SUCH AS CHILDREN’S
TOYS, FOOTBALLS, BASKETBALLS, ETC.

1.

FAILURE TO PROPERLY DRAIN
CONDENSED WATER  FROM THE
TANK, CAUSING RUST AND THINNING
OF THE STEEL TANK.

2. 

MODIFICATIONS OR ATTEMPTED
REPAIRS TO THE TANK.

3. UNAUTHORIZED 

MODIFICATIONS 

TO

THE UNLOADER  VALVE, SAFETY
VALVE, OR ANY OTHER COMPONENTS
WHICH CONTROL TANK PRESSURE.

4.

EXCESSIVE VIBRATION CAN WEAKEN
THE AIR TANK AND CAUSE RUPTURE
OR  EXPLOSION.  

ATTACHMENTS  & ACCESSORIES:

EXCEEDING THE PRESSURE RATING OF AIR
TOOLS, 

SPRAY GUNS, AIR OPERATED

ACCESSORIES, TIRES AND OTHER
INFLATABLES 

CAN CAUSE THEM TO

EXPLODE

OR FLY APART, AND COULD

RESULT IN SERIOUS INJURY.

HAZARD

RISK FROM FLYING OBJECTS

HOW TO PREVENT IT

WHAT CAN HAPPEN

THE 

COMPRESSED AIR

STREAM 

CAN CAUSE

SOFT TISSUE DAMAGE

TO EXPOSED SKIN

AND CAN PROPEL

DIRT, CHIPS, 

LOOSE

PARTICLES

AND SMALL OBJECTS 

AT HIGH

SPEED,

RESULTING IN PROPERTY DAMAGE

OR PERSONAL INJURY.

ALWAYS 

WEAR ANSI Z87.1 APPROVED

SAFETY GLASSES WITH SIDE SHIELDS

WHEN

USING THE COMPRESSOR.

NEVER POINT

ANY 

NOZZLE OR SPRAYER

TOWARD 

ANY PART OF THE BODY OR AT

OTHER 

PEOPLE OR ANIMALS.

ALWAYS 

TURN THE COMPRESSOR OFF AND

BLEED PRESSURE

FROM THE AIR HOSE AND

TANK BEFORE ATTEMPTING MAINTENANCE,
ATTACHING TOOLS OR ACCESSORIES.

Содержание CPLDC2540P

























Отзывы: