background image

6- ENG

A02231

HAZARD

HOW TO PREVENT IT

WHAT CAN HAPPEN

RISK OF BURNS

TOUCHING EXPOSED METAL

SUCH AS THE

COMPRESSOR HEAD OR OUTLET TUBES,

CAN RESULT IN SERIOUS BURNS.

NEVER TOUCH ANY EXPOSED METAL PARTS
ON COMPRESSOR

DURING OR IMMEDIATELY

AFTER OPERATION. 

COMPRESSOR WILL

REMAIN HOT

FOR SEVERAL MINUTES AFTER

OPERATION.

DO NOT

REACH AROUND PROTECTIVE

SHROUDS OR 

ATTEMPT MAINTENANCE

UNTIL UNIT HAS BEEN ALLOWED TO COOL.

HAZARD

HOW TO PREVENT IT

WHAT CAN HAPPEN

RISK FROM MOVING PARTS

NEVER OPERATE THE COMPRESSOR WITH
GUARDS

OR COVERS WHICH ARE 

DAMAGED

OR REMOVED.

ANY 

REPAIRS

REQUIRED ON THIS PRODUCT

SHOULD BE PERFORMED BY AUTHORIZED
SERVICE CENTER PERSONNEL.

MOVING PARTS 

SUCH AS THE PULLEY,

FLYWHEEL AND BELT  

CAN CAUSE SERIOUS

INJURY

IF THEY COME INTO CONTACT WITH

YOU OR YOUR CLOTHING.

ATTEMPTING TO OPERATE

COMPRESSOR

WITH DAMAGED OR MISSING PARTS 

OR

ATTEMPTING TO REPAIR COMPRESSOR
WITH PROTECTIVE SHROUDS REMOVED CAN
EXPOSE YOU TO MOVING PARTS AND 

CAN

RESULT IN SERIOUS INJURY.

HAZARD

HOW TO PREVENT IT

WHAT CAN HAPPEN

HAZARD

HOW TO PREVENT IT

WHAT CAN HAPPEN

RISK OF FALLING

A PORTABLE 

COMPRESSOR CAN FALL

FROM

A TABLE, WORKBENCH OR ROOF 

CAUSING

DAMAGE TO THE COMPRESSOR AND
COULD RESULT IN SERIOUS INJURY OR
DEATH TO THE OPERATOR.

ALWAYS 

OPERATE COMPRESSOR IN A

STABLE SECURE POSITION

TO PREVENT

ACCIDENTAL MOVEMENT OF THE UNIT.  

NEVER

OPERATE COMPRESSOR ON A ROOF OR
OTHER ELEVATED POSITION.  USE
ADDITIONAL AIR HOSE TO REACH HIGH
LOCATIONS.

RISK OF PROPERTY DAMAGE WHEN TRANSPORTING COMPRESSOR

OIL CAN LEAK OR SPILL

AND COULD

RESULT IN FIRE OR BREATHING HAZARD,
SERIOUS INJURY OR DEATH CAN RESULT.
OIL LEAKS WILL DAMAGE CARPET, PAINT OR
OTHER SURFACES IN VEHICLES OR
TRAILERS.

ALWAYS 

PLACE COMPRESSOR ON A

PROTECTIVE MAT WHEN TRANSPORTING

TO

PROTECT AGAINST DAMAGE TO VEHICLE
FROM LEAKS. REMOVE COMPRESSOR FROM
VEHICLE IMMEDIATELY UPON ARRIVAL AT
YOUR DESTINATION.

(Fire, Inhalation, Damage to Vehicle Surfaces)

Содержание CPLDC2540P

























Отзывы: