Porter-Cable CFFC350C Скачать руководство пользователя страница 9

9 - ENG

A09770

ASSEMBLY

Unpacking

1.  Remove unit from carton and discard all packaging. 

IMPORTANT:

 The outlet being used 

must be installed and grounded in 
accordance with all local codes and 
ordinances. 
2.  Make sure the outlet being used 

has the same configuration as 
the grounded plug. DO NOT USE 
AN ADAPTER. See illustration.

3.  Inspect the plug and cord before 

each use.  Do not use if there are 
signs of damage.

4.  If these grounding instructions 

are not completely understood, 
or if in doubt as to whether the 
compressor is properly grounded, 
have the installation checked by 
a qualified electrician.

Risk of Electrical
Shock. IMPROPER 

GROUNDING CAN RESULT IN 
ELECTRICAL SHOCK.
Do not modify the plug provided. If 
it does not fit the available outlet, 
a correct outlet should be installed 
by a qualified electrician.
Repairs to the cord set or plug 
MUST be made by a qualified 
electrician.

GROUNDING INSTRUCTIONS

Risk of Electrical 
Shock.  In the event 

of a short circuit, grounding reduces 
the risk of shock by providing an 
escape wire for the electric current. 
This air compressor must be 
properly grounded.

The portable air compressor is 
equipped with a cord having a 
grounding wire with an appropriate 
grounding plug (see following 
illustrations). 
1.  The cord set and plug with this 

unit contains a grounding pin. 
This plug MUST be used with a 
grounded outlet. 

INSTALLATION

HOW TO SET UP YOUR UNIT

Grounding Pin

Grounded 
Outlets 

Plug

Location of the Air Compressor

• 

Locate the air compressor in a 
clean, dry and well ventilated 
area. 

 

The air compressor should be 
located at least 12" away from 
the wall or other obstructions that 
will interfere with the flow of air. 

 

The air compressor pump and 
shroud are designed to allow for 
proper cooling. The ventilation 
openings on the compressor are 
necessary to maintain proper 
operating temperature. Do not 
place rags or other containers on 
or near these openings.

Lubrication and Oil

This unit needs no lubrication or oiling.

Содержание CFFC350C























Отзывы: