Portawattz POWER PAC, Инструкция для владельца

Страница: 22 / 32

18
PORTAWATTZ PowerPAC Owner’s Manual
Most of the PowerPAC’s capacity will be recharged in about 1 to
3 hours. Level of charge can be verified using the PowerPAC’s
Battery Level Indicator as explained in Section 4.1.1.
CAUTION: The generator output must be intended for battery
charging. An unregulated output can damage the battery.
8.5 Recharging with a Solar Panel
Small unregulated 12 volt solar panels rated to produce a
maximum of 3 amps (or 40 watts) can be used to charge the
PowerPAC via the Charger Input Socket. You will need to
purchase a standard 5.5 mm OD x 2.5 mm ID “DC Coaxial (Barrel
Type) Connector” to mate with the Charger Input Socket. Connect
the solar panel’s positive (red) wire to the coaxial plug’s inner
contact and the solar panel’s negative (black) wire to the plug’s
outer contact. Once the plug is inserted into the Charger Input
Socket and the solar panel is placed in the sun, the PowerPAC
will charge automatically just as with the AC Charger (see Section
8.2). A 3 amp solar panel will charge the PowerPAC in about 8
hours in direct sunlight.