Portawattz POWER PAC, Инструкция для владельца

Страница: 10 / 32

6
PORTAWATTZ PowerPAC Owner’s Manual
4.0 Indicators, Controls and
Connectors
Refer to Figure 1 in Section 3.1 for location of the items identified below.
4.1 Display Panel
The display panel is located on the front of the PowerPAC, directly
below its carrying handle. Located on the display panel, you will
find the PowerPAC’s DC Power Socket, the Charger Input Socket,
a Recharge Status Indicator light, and a Battery Level Indicator
that is actuated by the Battery Status Button.
4.1.1 The Battery Level Indicator
The Battery Level Indicator indicates the state of charge of
the PowerPAC’s battery. Its function is similar to the fuel
gauge in a car. When pressing and holding the Battery
Status Button, one or more of the display’s four lights will
illuminate, showing the approximate amount of charge
remaining in the battery. The following diagram shows the
function of each light:
When the battery is fully charged, all four lights will
illuminate. When discharged (empty), only the red “E” light
will illuminate and the battery must be recharged promptly.
The diagram shows the battery is approximately ¾ full.
Battery condition is indicated most accurately when the
battery has been unused for several minutes. Pressing the
Battery Status Button while supplying power to an appliance
may result in the battery appearing more “empty” than it
really is.
4.1.2 The Recharge Indicator
The Recharge Indicator operates only when the battery is
being recharged through the Charger Input Socket. It will
not operate when other charging methods are used. When
charging the battery with the AC Charger, this light will glow
amber, then change to green when the battery is fully
charged and the charging process has automatically
stopped.