ASSEMBLY INSTRUCTIONS
14
14. Feed pull chains through the grommets on each side
of the light kit. Then, attach the pull chain extensions to
the pull chains.
15. Restore the power at the main fuse or circuit breaker.
13. Lift glass bowl into the light kit. Ensure the clips on
inner edge of the light kit slide inside the glass bowl. The
glass bowl should snap into place.
Pull Chain Extension
Glass Bowl
Spring Clip
13
15
Switch
Housing Cap
Switch
Housing
Screw
Switch
Housing
16
16.
NO LIGHT KIT OPTION
(OPTIONAL)
a. Remove the three switch housing screws from the top
edge of the light kit.
b. Attach the switch housing cap to the switch housing
using the three previously removed switch housing
screws.
Note:
Align the notch in the switch housing cap
with the reverse switch.
c. Attach the pull chain extension (Step 14) to the fan pull
chain. Note: When facing the reverse switch, the fan pull
chain will be on the right.
d. Restore the power at the main fuse or circuit breaker.
8
