5
ASSEMBLY INSTRUCTIONS
3
2
1
1. Turn
OFF
the electrical power at the main fuse or circuit
breaker.
2. Secure the mounting bracket to the outlet box (not
included) using the two mounting screws and washers
supplied with outlet box.
Warning:
To reduce the risk of fire, electrical shock, or
personal injury, mount the fan to the outlet box marked
“acceptable for fan support”.
3. Remove the ten motor screws from the underside of
the motor. Keep the motor screws for installation of the
blade arms.
Note:
Remove the wire restraint from the wires on top of
the lower bracket.
4. Remove the pre-assembled bracket screws from the
lower bracket and the mounting bracket. Insert the tab
from one side of the lower bracket into the slot of the
mounting bracket. Then lift the other side of the lower
bracket up to the underside of the mounting bracket until
the three bracket screw holes are aligned.
4
Mounting
Bracket
Bracket
Screw
Lower
Bracket
Motor
Screw
Bracket
Screw
