Minor Repairs
273
Maintenance note
The jacking point for the jack on the vehicle must
be free of dirt.
1.Slightly slacken the wheel bolts of the wheel to
be changed.
2.Only attach the jack at the jacking points
provided. The jack foot must be in contact over
its whole area and must be positioned directly
below the head piece.
Use a suitable support surface if necessary.
3.Hold jack tight and wind it up until its head is in
contact with the jacking point on the vehicle.
Only jack vehicle up until only the wheel to be
changed is completely off the ground.
4.After lowering the vehicle, remove the jack.
Front jacking point
Access to the jacking points differs according to
the respective vehicle equipment.
Jacking points
f
Attach jack only at the points provided
A
or
C
.
Rear jacking point
The rear jacking point is accessible after removing
the covering cap
B
from the sill cover.
Removing covering cap:
f
Pull out covering cap
B
at the bottom at the
rear.
Inserting covering cap:
f
Insert the covering cap
B
in the bottom guides
and push in completely until you feel the upper
lugs snap into place.
Содержание Turbo 2007
Страница 105: ...104 Lights Direction Indicators and Windscreen Wipers ...
Страница 107: ...106 Multi Purpose Display and Instruments ...
Страница 224: ...Parking 223 Parking ParkAssist 224 Swivelling down mirror glass as parking aid 228 Garage door opener 228 ...
Страница 347: ...346 Index ...