Porsche Turbo 2007 Скачать руководство пользователя страница 255

Страница: 255 / 347

254

Maintenance and Car Care

Cleaning windows

Clean all windows regularly, inside and out,

with window cleaner.

We recommend the Porsche window cleaner.

Make sure not to damage the TV antennas in

the side windows when cleaning.

Do not use the same leather for painted

surfaces and for drying the windows.

Preservative residues could reduce transpar-

ency.

Remove insect residues with insect remover.

Note

The front side windows feature a water-repellent

(hydrophobic) coating which prevents soiling of

the windows.

This coating is subject to natural wear and can be

renewed.

Consult a qualified specialist workshop. We

recommend that you use a Porsche partner for

this work since these are staffed with trained

personnel and have the necessary parts and

tools.

Care of windscreen wiper blades

Wiper blades that are in perfect condition are vital

for a clear view.

Replace the wiper blades twice per year

(before and after the cold season) or if wiper

performance deteriorates or the blades are

damaged.

For information on changing wiper blades:

Please observe the chapter “WIPER BLADES”

on Page 245.

Periodically clean the wiper blades with a

window cleaner, especially after the vehicle

has been washed in a car wash.

We recommend the Porsche window cleaner.

If they are very dirty (e.g. with insect remains),

they can be cleaned with a sponge or cloth.

If the wiper blades rub or squeak, this may be due

to the following:
– If the vehicle is washed in an automatic car

wash, wax residues may adhere to the

windscreen. This wax residue can only be

removed by using a concentrated window

cleaner.

Please observe the chapter “ADDING WASHER

FLUID” on Page 243.

Please contact your Porsche partner for further

information.
– The wiper blades may be damaged or worn.

Replace damaged wiper blades as soon as

possible.

Repairing the underbody protection

The underside of the vehicle is lastingly protected

against chemical and mechanical effects.

Damage to the protective coating while driving

cannot be ruled out.

For this reason, have the vehicle underside

checked and repaired at regular intervals by a

qualified specialist workshop.

Warning!

Risk of fire in the area of the exhaust system.

Do not apply additional undersealing or rust

protection agent on or near the exhaust

manifolds, exhaust pipes, catalytic converters

or heat shields.

The protective material could overheat and

ignite while you are driving.

Содержание Turbo 2007




























































































































































































































































































































































Результаты поиска

Содержание Turbo 2007

Отзывы:

Похожие инструкции для Turbo 2007

Бренды по названию

Популярные бренды

Porsche Turbo 2007, Руководство пользователя

Результаты поиска

Содержание Turbo 2007

Отзывы:

Похожие инструкции для Turbo 2007

Бренды по названию

Популярные бренды