REPLACEMENT PARTS LIST
PART NO.
DESCRIPTION
Parts are determined by toilet tank number which can be found marked inside tank.
NOTE:
"XXX" represents color or trim finish options. Specify when ordering.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
97320-60
97320-28
Veneto II
®
and III Trip Lever Assembly
Veneto II
®
and III Water Control Assembly
Veneto II
®
and III Water Control Assembly
Champion
®
4 Valve Seal Kit
Champion®4 Flush Valve Assembly
Champion
®
4 Flush Valve Assembly
Champion
®
4 Adapter Assembly, Kit # 247
Champion
®
4 PVC Refill Tube
Veneto III
®
Chinaware Tank Cover Assembly
Veneto II
®
and III Kit #251 (Bolt Caps)
Clip For Refill Tube
Champion
®
4 Bead Clevis Pin Assembly
Veneto III
®
Toilet Seat
Spacer
Gasket
7 3 0 1 3 7 5 - 1 0 0 R e v . B
Does not flush
Poor or sluggish flush
Toilet leaks
Toilet does not shut off
a. Water supply valve closed.
b. Supply line blocked.
c. Flush valve chain too loose or disconnected.
d. Sand or debris lodged in water control.
a. Bowl water level too low.
b. Supply valve partly closed.
c. Partially clogged trapway and/or drain pipe and/or vent.
d. Supply pressure too low.
e. Flush valve chain too tight, holding flush valve open.
a. Poor supply line connection.
b. Poor bowl to tank/floor connection.
a. Flush valve seal leaking or deformed.
b. Sand or debris lodged in water control.
a. Open valve and allow water to fill tank.
b. Shut off water supply, disconnect supply line and inspect all
gaskets and washers. Reassemble. Also, see Fluidmaster
maintenance. (see Step 13)
c. Readjust chain length as required.
d. Shut off water supply. Remove cap and clean as per Step 13.
a. Check that refill tube is connected to water control and
inserted into tank overflow without being kinked or damaged.
(see Step 11A)
b. Open supply valve fully. Be sure that proper supply tube size
is used.
c. Remove obstruction. Consult a plumber if necessary.
d. Normal supply pressure must be at least 20 psi.
e. Readjust chain length as needed. Review Step 9A.
a. Review Step 8a and 8b of installation procedure.
b. Review Step 4 through 6 of installation procedure.
a. Clean debris from seal surface. Replace flush valve seal as
needed. (see Step 11)
b. Shut off water supply. Remove cap and clean as per Step 13.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
- 4 -
CHAMPION® FLUSHING SYSTEM TEN-YEAR WORRY-FREE™ LIMITED WARRANTY
For this warranty to become effective, the accompanying warranty registration card and proof of purchase must be completed and returned to the
address on the warranty registration card within 30 days of purchase.
If inspection of this Porcher plumbing product, inclusive of china and all mechanical components, within ten years after its initial purchase, confirms
that it is defective in materials or workmanship, Porcher will repair or, at its option, exchange the product for a similar model.
This warranty
does not apply
to local building code compliance. Since local building codes vary considerably, the purchaser of this product should
check with a local building or plumbing contractor to insure local code compliance before installation.
This warranty
shall be void
if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse,
misuse, accident or other damage; if it was not installed in accordance with Porcher's instructions; or if it has been modified in a manner inconsistent
with the product as shipped by Porcher.
This warranty
DOES NOT COVER
any damage caused by the use of in-tank cleaners.
Porcher's option to repair or exchange the product under this warranty does not cover any labor or other costs of removal or installation,
nor shall
Porcher be responsible for any other incidental or consequential damages attributable to a product defect or to the repair or exchange of a
defective product, all of which are expressly excluded from this warranty.
(Some states or provinces do not allow the exclusion or limitation of
implied warranties, so this exclusion may not apply to you.)
This warranty gives you specific legal rights. You may have other statutory rights that vary from state to state or from province to province, in which
case this warranty does not affect such statutory rights.
For service under this warranty, it is suggested that a claim be made through the contractor or dealer from or through whom the product was
purchased, or that a service request (including a description of the product model and of the defect) be sent to the following address:
In the United States:
Porcher Inc.
P.O. Box 6820
Piscataway, New Jersey 08855
Attention: Director of Consumer Affairs
For residents of the United States, warranty
information may also be obtained by calling the
following toll free number: (800) 359-3261
www.porcher-us.com
In Canada:
Porcher,
2480 Stanfield Rd.
Mississauga, Ontario
Canada L4Y 1S2
Toll Free: (800) 387-0369
In Mexico:
Porcher,
Planta Santa Clara
Via Morelos #330
Santa Clara Coatitla
de Morelos 55540
Estado de Mexico, Mexico
738797-XXX
738565-443.0070A
738565-444.0070A
7301111-0070A
3280.040-0070A
3280.140-0070A
738826-0070A
738570-0070A
80320-00-XXX
82220-00-XXX
072989-0070A
738985-0070A
70320-00-XXX
7381062-0070A
7381068-0070A
