Using your POPcd
53
Note:
If you do not use or pause your POPcd for approximately 30 minutes and no
audio signal is received, it will automatically go to Standby mode
Auxiliary Input mode
Check that your POPcd is in Auxiliary input mode If you are not already in Auxiliary input
mode, briefly press and release the Mode button until you are in Auxiliary input mode
(check the display)
Using a 3 5mm audio input connection cable (not included), Auxiliary input allows for a
quick and easy connection to an external sound source
1.
Connect one end of the 3 5mm audio connection cable to the headphone (or
auxiliary out) socket of your secondary device, connect the other end to the Aux in
socket on the front of your POPcd
2.
Press the Play button on your external device to start playback through the POPcd
speakers
To gain optimal volume levels, adjust the output volume level on both the secondary
device and on the POPcd
Note:
It is recommended that you unplug the Audio cable from the Line in socket after
you have finished listening to your external device
Using the alarm
Setting an alarm
Note:
Check that the POPcd has the correct time and date before you set an alarm
1.
Press and release the Alarm button
2.
Use the left hand rotary control to scroll to Alarm 1 or Alarm 2 Press the left hand
rotary control to Select
3.
‘Alarm 1 (or 2) Info’ is displayed, together with a list of Alarm setting options Use the left
hand rotary control to scroll to each Alarm option, press the left hand rotary control to
Select
Содержание POPcd
