9
2. PUMP OVERVIEW
2.3 Controller Features
2.4 Controller Overview
• Simple user interface
• IPX4 certifed UV and rain-proof enclosure
• Onboard time of day schedule
• Adjustable priming mode
• Programmable quick clean mode
• Diagnostic alarm display and retention
• Active power factor correction
• Accepts 220-240V, 50/60Hz input power
• Auto power limiting protection circuit
• One week. clock retention for power outages
The Variable Speed Pump uses a premium efficiency variable speed motor that
provides tremendous program flexibility in terms of motor speed and duration
settings. The pump is intended to run at the lowest speeds needed to maintain a
sanitary environment, which in turn minimizes energy consumption. Pool size, the
presence of additional water features, chemicals used to maintain sanitary conditions,
and local environmental factors will impact optimal programming necessary to
maximize energy conservation.
WARNING -
This pump is for use with 220-240 V nominal, and in pool pump applications
ONLY. Connection to the wrong voltage, or use in other application may cause damage to equipment
or personal injury.
The integrated electronics interface controls the speed settings as well as the run
durations. The pump can operate at speeds ranging between 450 and 3450 RPM and
will operate within the voltage range of 220-240V at either 50 or 60Hz input frequency.
Program customization may require some trial-and-error to determine the most
satisfactory settings as dictated by the conditions. In most cases, setting the pump
at the lowest speed for the longest duration is the best strategy to minimize energy
consumption. However, conditions may require running the pump at a higher speed
for some duration of time each day to maintain proper filtration to achieve satisfactory
sanitation.
NOTE
: Optimize the pump to suit individual pool conditions. Specific conditions
including pool size, other devices, features and environmental factors can all impact
the optimal settings.