Pooli Gamma 4 OS030981K, Руководство по эксплуатации продукта

Страница: 7 / 16

2. Fill the SPA with water
2.1. Preparation
(1)Ensure that the spa is powered off.
(2)Double check the drain valve is closed in case of water leaking from the SPA. The drain valve is
located at the corner of the SPA cabinet. See 6.1 (page 12) for details.
(3)Take out the filter core to enable filling of the spa through the filter itself (See 4.3 How to
open/remove/change the filter?).
4.2 Fill your SPA within the standard level
*Please refer to the water level marker on your tub (as picture below) and make sure the water
is filled up within the standard range.
*Start all the pumps to test the system. See section 5. for the system instruction.
*Put the filter core back to the filter box. Please remove the protective film before use.
4.3 Additional Instruction: How to open/remove/change the filter?
1)
Remove the cover by rotating it slightly
2)
Rotate the inside cover 90 degrees to remove the inside cover.
3) Untighten the filter core by rotating it counterclockwise.
4) Remove the filter core from the box.
OR
Put the new filter core into the box and tighten it by rotating.
5)
Put the cover back in place.
5